-Speaker Extension-
The VS265R features stereo extension speaker
sockets to allow you to further expand upon the
benefits of a Stereo Chorus amplifier.
Due to the combo’s design the VS265 can be
used with any speaker extension cabinet rated
between 4 and 16 Ohms (inclusive). By using
extension speaker cabinets (model no. VS212) you
will increase the spread of your guitar sound.
3. Ext. Loud Speaker Jack
Feeds the left hand signal of your sound to an
external speaker cabinet such as the Marshall
VS212.
4. Stereo Headphones Jack
For connection to stereo headphones, allowing
you to enjoy the stereo chorus effect even when
silent practice is the order of the day.
5. Ext. Loud Speaker Jack
Feeds the right hand signal of your sound to an
external speaker cabinet such as the Marshall
VS212.
6. Filtered D.I. Output (Right)
Feeds the right hand signal of your sound to
recording or P.A. equipment.
- Effects Loop -
An effects loop allows you to connect external
effects in the optimum position in the signal path.
Time based effects such as delays, reverbs and
chorus are more effective in the effects loop,
whereas effects such as distortion and wah-wah are
more suited to being used in line between the guitar
and the input of the amplifier.
7. Effects Return Jack
For connection to the output of an external
effects processor.
8. Effects Send Jack
For connection to the input of an external effects
processor.
9. Footswitch Socket
For connection of footswitch. The VS265R is a
three channel amplifier and it is possible to switch
between the Clean Channel and Overdrive 1 and
Overdrive 2 Channels via the footswitch which also
features LED’s to indicate status.
It is also possible to switch the stereo chorus on
and off via the footswitch in addition to via the
front panel of the unit.
6
To Next Page
Loading...
Need help?
General
