WOBURN
ACTION
Plug the power cord into a working wall socket and plug the connector
into the power jack on the back of the active loudspeaker.
Unplug and re-plug the 3.5mm cord/input cable/signal cable into
both the active loudspeaker and the music player.
Turn up the volume on the active loudspeaker.
Turn up the volume on the music player.
Turn down the volume.
Try another sound file (mp3) or music player.
Turn down playback level on the volume knob or reduce the sound
level on the music player.
Turn down the volume control on the control panel and/or music
player. Reduce the bass boost on the control panel or excessive bass
boost/eq on the music player.
Turn down the volume on the speaker or on the music player.
Reduce the bass boost.
Move the active loudspeaker to another spot or turn off or move
other electronic devices.
To Next Page
Loading...
Need help?
General
