Marshall Electronics CV630-IP - Audio Settings via Web Interface

English - 37
6.2.9 Setting - Network
No
Item
Function Descriptions
1 Network
Network setting of camera. Change of setting is available when DHCP
function is closed.
2 RTMP Setting
Copy the RTMP web address provided by the RTMP service platform
and paste it to the RTMP connection address to publish the camera
images on the RTMP service platform
To upload to YouTube for live streaming, the audio function must be
turned on first
3 RTSP Setting
Enable/Disable Multicast. It is suggested to enable Multicast when the
number of users online watching the live image simultaneously is more
than 4
4 MPEG-TS Setting
Set MPEG-TS format
<Remark> The following port has been used by the camera. Setting of
the port may not connect correctly
8554, 8556, 8557, 8080, 80, 81, 9090, 23
5 SNTP Setting
Set SNTP Server IP
6 Port Setting
Set HTTP port. The default Port value is 80
<Remark> Change of setting is available only when DHCP function of
camera is closed
1
2
3
4
5
6