Marshall Electronics CV630-IP - Description of LED Indicator; Tally Indicator Light Function Description

English - 7
3.2 Description of LED indicator
Status
Power
Standby
Startup in progress
(initialization)
Green light Orange light
In use
Green light
No indicator
In standby mode
No indicator
Orange light
3.3 Tally Indicator Light Function Description
3.3.1 The tally indicator light function may be enabled through the control of RS-232
command. The setting method is as follows:
Tally Mode: 8x 01 7E 01 0A 01 0p FF
p = 0: OFF
p = 4: Red light (half-brightness)
p = 5: Red light (full-brightness)
p = 6: Green light (full-brightness)
p = 7: Orange light (full-brightness)