Marshall Electronics CV630-IP - Time Settings via Web Interface; Firmware Upgrade

English - 39
No
Item
Function Descriptions
1
Event Logs
If the camera encounters errors, an error code log will be established
6.2.13 Setting - Maintenance - System Service
No
Item
Function Descriptions
1
Reset to the default
value
Select the reset button to resume the factory default setting as the web
page setting
2 Setting File
The web page setting parameters can be exported from the computer
and imported/applied to another camera
3
Baud Rate
Set the camera Baud Rate for the use of connecting RS-232
communication
1
2
3