JR101017a
9
9. Operation Via Software
VMV-402-SH Manual
Control Interface
1. Program Out Panel
2. Additional Functions
: Toggle audio meters on/off. (When the output is in full screen mode, it will
display on both sides of the window).
: Toggle audio passthrough on/off. (Blocks audio passthrough from SDI source).
Select quad-view mode for program output. All four sources will be shown.
Select only source 1 for program output
Select only source 2 for program output
Select only source 3 for program output
Select only source 4 for program output
www.marshall-usa.com