Martin Audio MA12K - 2010 User Manual

All material © 2010 Martin Audio Ltd. Subject to change without notice 11
1.7 Connecting Remote Control
You can control the amplifier via the RS485 interface; the illustration shows the wiring configuration for the
connection of the data cable to the RJ45 socket located on the rear panel of the amplifier.
The same picture shows also the ID selection for Remote Control (in this case ID= 28); to change the ID;
rotate the selectors at the desired position.

Martin Audio MA12K - 2010 Specifications

General

Brand	Martin Audio
Model	MA12K - 2010
Category	Amplifier
Language	English