Martin Audio MA12K - 2010 User Manual

All material © 2010 Martin Audio Ltd. Subject to change without notice 24
3.9 DSP features
 AES3 digital input
 high performance (128 dB SNR) analogue input
 high performance (122 dB SNR) analogue output
 latest generation SHARC DSP with 40 bit floating point signal path for noiseless processing
 enhanced IIR filtering routine optimized for the highest SNR
 up to 2 seconds of main delay
 PEQ16: fully parametric equalizer, 16 band, each with 8 different filter shapes (peaking, hi/lo
shelving, hi/lo pass EQ, band pass, band stop, all pass)
 alignment delay with high temporal resolution
 crossover with IIR Butterworth, Bessel and Linkwitz-Riley filters
 advanced crossover with FIR linear phase brick-wall filters
 speaker and amplifier monitor and analyzer to estimate power and load impedance
 peak limiter with look-ahead
 true power limiter to avoid burning voice coils while getting the maximum performances from drivers
 patented damping control and cable resistance compensation: get optimally damped bass response
regardless of cable length
3.10 DSP Submenu

Martin Audio MA12K - 2010 Specifications

General

Brand	Martin Audio
Model	MA12K - 2010
Category	Amplifier
Language	English