Acrobat user manual Stand-alone operation 13
To set the master
Important! Set only 1 fixture as master (DIP-switch pin 2 and 10 ON).
1 Set DIP-switch pins 2 and 10 to ON.
2 Set DIP-switch pins 3, 5, 6, 7, 8, 9, and 11 to OFF.
3 Select options with DIP-switch pins 1, 4, and 12.
To set a slave
1 Set DIP-switch 10 to ON.
2 Set pins 1, 2, 3, 4, 5 and 11 to OFF.
3 Select options with DIP-switch pins 6, 7, 8, 9, and 12.
STAND-ALONE SETTINGS
DIP-switch pins 1-9 enable stand-alone options only when pin 10 is ON. When
pin 10 is off, the DIP-switch selects a DMX address. Pin 11 must be OFF for
stand-alone operation.
Pin 12 selects lamp power and works in all modes. Set it to ON for reduced lamp
voltage and longer lamp life; set it to OFF for full intensity.
The DIP-switch 10 setting takes effect only after the fixture has been turned off
and on.
Fixture Option Setting (0 = OFF, 1 = ON)
1234567891011
single or
master
auto trigger 0 1 0 0
10
music trigger 1 1 0 0
slow movement 1 0 1 0
slave
Random
color/gobo
01
Use a different
gobo in relation to
the master.
01
Rotate the mirror
drum in the
opposite direction
to the master.
01
Swivel the mirror
drum in the
opposite direction
to the master
01
2
1