Martin Acrobat User Manual

18 Basic service Acrobat user manual
B ASIC SERVICE 9
To set the 6/7-ch. DMX jumper
1 Disconnect the fixture from power.
2 Remove the effects section cover. It is secured by 5 Torx-20 screws: 3 on the
side with print and 2 on the other side.
3 Locate PL 118 on the printed circuit board, next to DIP-switch pin 12.
4 Using a pair of tweezers or similar tool, place the jumper on 1 of the 2 pins, or
remove it completely, for 6-channel DMX operation. Place the jumper on both
pins to enable 7-channel DMX operation.
5 Replace the cover before applying power.
To replace the main fuse
1 Unplug the mains cable from the input socket. Pry open the fuse holder and
remove the fuse.
2 Replace the fuse with one of the same type. The fuse rating is listed on serial
number label.

Martin Acrobat Specifications

General

Brand	Martin
Model	Acrobat
Category	Home Lighting
Language	English