Need help?Do you have a question about the Martin EVO and is the answer not in the manual?
Explains immediate hazards that will result in severe personal injury or death.
Explains hazards or unsafe practices that could result in personal injury.
Explains hazards or unsafe practices that could result in product or property damages.
Indicates instructions that must be followed for proper installation and operation.
Provides general statements to assist the reader.
Describes the EVO ® Return Roller as a pivoting track-mounted return idler for safe and quick replacement.
Lists American National Standards Institute (ANSI) and OSHA regulations referenced in the manual.
States that only standard hand tools are required for installation and service.
Covers safety rules, lockout/tagout procedures, and specific dangers related to conveyor operation.
Instructions for inspecting shipping containers and reporting any damage or missing parts.
Mandates turning off and locking out all energy sources before installation.
Advises testing atmosphere for gas/dust and using fire retardant covers if welding.
Details the step-by-step process for installing the EVO ® Return Roller assembly onto the conveyor.
Instructions for cleaning the chute wall and applying warning labels.
Procedures for running the belt, checking fasteners, and ensuring proper installation.
Outlines weekly maintenance tasks, including cleaning, lubrication, and fastener checks.
Emphasizes lockout/tagout and tool removal safety during maintenance operations.
Lists part numbers for the EVO ® Return Roll Assembly based on belt width.
To Next Page
General