Martin Engineering M3796-05/12 3 EVO
®
Return Roller
Before Installing Return Roller
The delivery service is responsible for damage occurring in
transit. Martin Engineering CANNOT enter claims for
damages. Contact your transportation agent for more
information.
1. Inspect shipping container for damage. Report damage to delivery service
immediately and fill out delivery service’s claim form. Keep any damaged
goods subject to examination.
2. Remove EVO
®
Return Roller assembly from shipping container.
3. If anything is missing contact Martin Engineering or a representative.
Before installing equipment, turn off and lock out/ tag out all
energy sources to the conveyor and conveyor accessories
according to ANSI standards. Failure to do so could result in
serious injury or death.
4. Turn off and lock out/tag out energy source according to ANSI standards
(see “References”).
If this equipment will be installed in an enclosed area, test the
gas level or dust content before using a cutting torch or
welding. Using a torch or welding in an area with gas or dust
may cause an explosion resulting in serious injury or death.
5. If using a cutting torch or welding, test atmosphere for gas level or dust
content. Cover conveyor belt with fire retardant cover.
Before Installation
To Next Page
Loading...
General