© Martin Engineering GmbH 12 M3625UK-10/15
Installation Preparation
2. If the delivery is incomplete or there is any transit damage,
make sure that this is documented and have the freight forward-
er confirm the same. All damaged products should be saved for
inspection.
3. Depending on the scope of the order, the delivery should con-
tain the following parts:
•MARTIN
®
Tracker Conveyor Belt Centring System
(upper or lower guide unit)
• Two conveyor belt warning labels, part no. 23395
• Two warning labels for crushing hazard, part no. 30528
•MARTIN
®
Tracker conveyor belt centring system, part no.
M3625
4. Missing or damaged parts must be reported to Martin Engineer-
ing or the authorised dealer.
To Next Page
Loading...