MartinLogan Motion 2 User Manual

9
speCiFiCations*
Frequency.Response        
Dispersion.              
Sensitivity               
Impedance               
Crossover.Frequency       
High.Frequency.Driver.      
Low.Frequency.Driver       
Cabinet.                 
Components              
Maximum.Power.Handling   
Binding.Post.Inputs         
Weight                 
Dimensions.(HxWxD).      
MARTINLOGAN.MOTION.2
110–25,000 Hz ± 3 dB
80° x 80°
86 dB @ 2.83 volts/ meter
4 Ohms (nominal)
2,800 Hz
1” x 1.4” (2.6cm x 3.6cm)
Folded Motion Transducer with
5.25” x 1.75” (13.3cm x
4.4cm) diaphragm.
3.5” (8.9cm) poly cone with
stamped steel basket. Non-
resonant asymmetrical chamber
format. Rigid structured dust cap
to reduce cone break-up modes.
Sealed
Custom air core coil and low
DCR steel laminate inductors.
Polyester film capacitors in series
and low DF electrolytic capaci-
tors in parallel. Overall system
thermal/current protection.
50 watts
Push style with banana jacks
4 lbs. (1.81 kg)
11.3” x 5.3” x 4.5”
(28.6cm x 13.3cm x 11.4cm)
MARTINLOGAN.MOTION.4
.70–25,000 Hz ± 3 dB
80° x 80°
90 dB @ 2.83 volts/ meter
4 Ohms (nominal)
2,900 Hz
1” x 1.4” (2.6cm x 3.6cm)
Folded Motion Transducer with
5.25” x 1.75” (13.3cm x
4.4cm) diaphragm.
4” (10.2cm) paper cone with
stamped steel basket. Non-
resonant asymmetrical chamber
format. Rigid structured dust cap
to reduce cone break-up modes.
Folded bass-reflex port
Custom air core coil and low
DCR steel laminate inductors.
Polyester film capacitors in series
and low DF electrolytic capaci-
tors in parallel. Overall system
thermal/current protection.
75 watts
Push style with banana jacks
6 lbs. (3.2 kg)
12.6” x 5.6” x 5.25”
(32cm x 14.2cm x 13.3cm)
*Specifications are subject to change without notice.

MartinLogan Motion 2 Specifications

General

Brand	MartinLogan
Model	Motion 2
Category	Speakers
Language	English