To Next PageTo Next PageWhy won't my Maruyama Trimmer engine start?
If your Maruyama Trimmer engine won't start, here are a few things to check: * Ensure the STOP switch is in the 'on' position. * Make sure the fuel tank isn't empty; if it is, fill it. * If the engine is flooded, use the warm engine starting procedure.
What to do if Maruyama Trimmer engine lacks power or stalls when cutting?
If your Maruyama Trimmer engine lacks power or stalls when cutting, check if the throttle wire has come loose and tighten it. Also, ensure that the air filter is clean; if it's dirty, clean or replace it.
What to do if my Maruyama BC4321H-RS Brush Cutter engine will not start?
If your Maruyama Brush Cutter engine won't start, first ensure the STOP switch is in the on position. Also, check the fuel tank and fill it if empty. If the engine still doesn't start, press the primer bulb until fuel flows through the fuel return line. If the engine is flooded, use the warm engine starting procedure.
Why does my Maruyama BC4321H-RS engine lack power or stall when cutting?
If your Maruyama Brush Cutter engine lacks power or stalls when cutting, check the throttle wire and tighten it if it has come loose. Additionally, inspect the air filter and clean or replace it if it's dirty.
General| Shaft Type | Straight |
|---|---|
| Starter System | Recoil |
| Engine Type | 2-stroke |
| Power Output | 1.6 kW |
| Fuel Tank Capacity | 0.9 L |
| Handle Type | Bike |
