EasyManua.ls Logo

Maruyama HT230D User Manual

Maruyama HT230D
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Owner’s/Operator’s Manual
Completely read and understand this manual before using this product.
HT230D, HT230DL
HT230DS, HT230DLS
HT230D-R, HT230DL-R
HT230DS-R, HT230DLS-R
HT230, HT230S
HT230L, HT230LS
Question and Answer IconNeed help?

Do you have a question about the Maruyama HT230D and is the answer not in the manual?

Maruyama HT230D Specifications

General IconGeneral
BrandMaruyama
ModelHT230D
CategoryTrimmer
LanguageEnglish

Summary

Foreword

Specifications

Product Description

Marking

Symbol Explanation

Safety Instructions

Operator Safety

General safety guidelines for the operator of the hedge trimmer.

Power Hedge Trimmer Safety

Safety precautions specific to operating the power hedge trimmer.

Fuel Safety

Guidelines for safe handling and storage of gasoline and fuel mixture.

Power Hedge Trimmer Operating Safety

Safety measures and best practices for operating the hedge trimmer.

Before Operation

Fueling

Precautions and steps for safely fueling the hedge trimmer.

Fuel: Mixing Gasoline and Oil

Instructions for correctly mixing 2-cycle oil with gasoline for the hedge trimmer.

Adjusting the Cutting Blades

Rotational Rear Handle

Starting and Stopping Procedure

Starting the Engine

Step-by-step guide to starting the hedge trimmer engine.

To Stop The Engine

Instructions on how to properly shut down the hedge trimmer engine.

Carburetor Adjustment

Engine Idle Speed

Procedure for adjusting the engine idle speed for optimal performance.

Operating the Power Hedge Trimmer

Regular Maintenance

Air Filter

Maintenance procedures for cleaning and replacing the air filter.

Fuel Filter

Procedure for replacing the fuel filter located inside the fuel tank.

Spark Plug

Instructions for checking, cleaning, adjusting, and replacing the spark plug.

Cylinder Cooling Fins

Maintenance guidelines for cleaning cylinder cooling fins to prevent overheating.

Lubrication : Gearcase and Blades

Procedure for lubricating the gearcase and cutting blades at recommended intervals.

General Cleaning and Tightening

Storage

Related product manuals