15
OPERATION OF ICE MACHINE
First Use
Initial startup requires no adjustments. When plugged in, the
unit will begin operating under the factory default settings. If
the unit was turned off during installation, simply press
and the unit will immediately switch on. To turn the unit
off, press .
Temperature displayed reects actual temperature inside
unit.
If the temperature displayed is different than selected, the
unit is progressing towards the selected temperature. Time
to reach set point varies based upon ambient temperature,
temperature of product loaded, door openings, etc. Marvel
recommends allowing the unit to reach set points before
loading.
NOTE
Ice
The Nugget Ice Machine produces cylindrical bits of
compressed ice approximately 3/4” x 1/2”.
Ice is produced until the machine senses the bin is full. As
ice slowly melts in the bin, the level of ice drops and ice
production resumes. This ensures a constant supply of
fresh ice is always available.
The factory default ice setting is 0, which produces a rm
and compact ice nugget. Our ice adjustability feature allows
you ve levels of adjustment from 0 to -5. At -5 the ice is soft
and chewable.
To adjust the ice density:
1. Hold for 5 seconds - display will ash current ice
setting.
2. Adjust using or .
3. Conrm setting by pressing .
To Next Page
Loading...
