3.5.2Solar Charging
Note: This product comes with a built-in 120W MPPT. Do not use solar panels with extra MPPT.
Marxon is not responsible for any damage caused by the use of unofficial charging cables and the
use of non-standard operating methods.
As shown in the figure, users can charge the product by connecting multiple solar panels in parallel.
Solar panels should have the same voltage ranging from 11-25V, and the total power should not
exceed 120W. The maximum voltage of single or parallel solar panels should not exceed 25V,
otherwise, there is a risk of damaging the product. You can find more connection guide information in
the Solar Panel User Manual or on our official website at www.marxon.net.
Solar Input Indicator
9
To Next Page
Loading...