EasyManua.ls Logo

Maschio EXTREME 266 HTC - User Manual

Default Icon
240 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Cod. F07022408 2020-04
EXTREME
266-286
*)
*) Valido per Paesi UE
*) Valid for EU member countries
*) Valable dans les Pays UE
*) Gilt für EU-Mitgliedsländer
*) Válido para Países UE
EN
USE AND MAINTENANCE
MASCHIO Fienagione S.p.A.
Original manual written in ITALIAN

Table of Contents

Questions and Answers

  • C
    Catherine WellsSep 23, 2025
    What does "PTO blocked during binding" mean on my Maschio Farm Equipment display?
    • G
      Gloria SparksSep 23, 2025
      If a message appears on the display of your Maschio Farm Equipment saying "PTO blocked during binding," it could be because the PTO of the tractor is not moving, so engage the PTO. It may also be that the PTO sensor is badly adjusted, so adjust the sensor. If that doesn't work, the sensor may be broken or defective, requiring replacement.
  • C
    Courtney AdamsAug 23, 2025
    What to do if the pick-up slips and stops on my Maschio EXTREME 266 HTC Farm Equipment?
    • H
      Hannah ShafferAug 23, 2025
      If the pick-up slips and stops, it could be due to several reasons. It may be that the pick-up is too low, causing the tines to touch the ground. In this case, raise the pick-up by adjusting the position of the support wheels. Alternatively, the windrow might be too heavy with humid tangles; try reducing the volume of the swathe by half. Finally, check the safety bolt and replace it if it's broken.
  • S
    Stephanie WheelerAug 25, 2025
    Why is the bale density insufficient with my Maschio Farm Equipment?
    • C
      Cindy MontgomeryAug 26, 2025
      If you're getting insufficient bale density with your Maschio Farm Equipment, it could be due to several factors: 1. Low pressure. Increase the working pressure. 2. Irregular pick-up feed. Feed the chamber uniformly on both sides. 3. Poor hold of the seals on the bale pressure jacks. Replace the seals of the jacks and tighten the hydraulic fittings. 4. Belts of different lengths. Dismantle the belts and check that they are of identical length. 5. Feed speed too high. Reduce the feed speed.
  • I
    Ian JacobsAug 27, 2025
    Why are the tines of the pick-up overtaking the forage on my Maschio EXTREME 266 HTC Farm Equipment?
    • E
      ereeseAug 27, 2025
      If the tines of the pick-up overtake the arriving forage, it indicates that the pick-up speed is too slow compared to the work speed. To resolve this, reduce the work speed or increase the rpm of the tractor PTO.
  • B
    bryan68Aug 27, 2025
    What causes the belts forming the bale to break on Maschio EXTREME 266 HTC?
    • M
      mathew10Aug 27, 2025
      If the belts forming the bale break and the clinches give way on your Maschio Farm Equipment, consider these possibilities: * Presence of foreign bodies in the forage. Check and if necessary replace or repair the belts. * The belts are not aligned correctly. Adjust the belt guiders and/or rollers of the tailgate. * The bale has exceeded the maximum diameter allowed. Check the adjustment end of strokes of the bale diameter. * The bale has exceeded the maximum diameter allowed. Check that the electrical system, cables of the machine, connection cables to the tractor, indicators and acoustic signal are working.
  • D
    Daniel FlemingSep 18, 2025
    Why doesn't the bale diameter correspond to the set value on my Maschio EXTREME 266 HTC Farm Equipment?
    • C
      Christopher WarrenSep 18, 2025
      If the bale diameter does not correspond to the value set on your Maschio Farm Equipment, the potentiometer may have lost its synchronisation. Contact your dealer for re-phasing of the potentiometer.
  • C
    Christopher YoungSep 14, 2025
    What does "Battery insufficient" mean on my Maschio EXTREME 266 HTC display?
    • J
      James DavidSep 14, 2025
      If a message appears on the display of your Maschio Farm Equipment saying "Battery insufficient," it indicates low voltage. Check the battery or the recharging system of the tractor.
  • D
    David WilliamsSep 17, 2025
    What does "Bale binding not correct" mean on my Maschio Farm Equipment display?
    • J
      Jade EspinozaSep 18, 2025
      If a message appears on the display of your Maschio Farm Equipment saying "Bale binding not correct", it means the net has not been taken by the bale. Find and eliminate the cause, then restart the binding by pressing the "START-STOP" button.
  • F
    francissanchezSep 6, 2025
    Why is the clutch slipping on my Maschio Farm Equipment?
    • C
      Carolyn MillsSep 6, 2025
      If you're experiencing clutch slipping on your Maschio Farm Equipment, it could be due to a bale that is too heavy or has too big a diameter; in this case, reduce the bale weight or diameter. Alternatively, the clutch disks may be worn out, requiring replacement.
  • N
    Nathan CarpenterSep 3, 2025
    Why does the forage wrap around the drive rollers on my Maschio Farm Equipment?
    • A
      Alejandra ClarkSep 3, 2025
      If the forage wraps around the drive rollers of your Maschio Farm Equipment, it could be due to high humidity in the forage. The forage must be conditioned, so bale when the humidity is quite low. It may also be that the scraper of the roller is not adjusted well or is worn, so adjust or replace the scraper.

Maschio EXTREME 266 HTC Specifications

General IconGeneral
BrandMaschio
ModelEXTREME 266 HTC
CategoryFarm Equipment
LanguageEnglish

Related product manuals