What does "PTO blocked during binding" mean on my Maschio EXTREME 266 Farm Equipment display?
If a message appears on the display of your Maschio Farm Equipment saying "PTO blocked during binding," it could be because the PTO of the tractor is not moving, so engage the PTO. It may also be that the PTO sensor is badly adjusted, so adjust the sensor. If that doesn't work, the sensor may be broken or defective, requiring replacement.
What to do if the pick-up slips and stops on my Maschio EXTREME 266 Farm Equipment?
If the pick-up slips and stops, it could be due to several reasons. It may be that the pick-up is too low, causing the tines to touch the ground. In this case, raise the pick-up by adjusting the position of the support wheels. Alternatively, the windrow might be too heavy with humid tangles; try reducing the volume of the swathe by half. Finally, check the safety bolt and replace it if it's broken.
Why is the bale density insufficient with my Maschio EXTREME 266 Farm Equipment?
If you're getting insufficient bale density with your Maschio Farm Equipment, it could be due to several factors: 1. Low pressure. Increase the working pressure. 2. Irregular pick-up feed. Feed the chamber uniformly on both sides. 3. Poor hold of the seals on the bale pressure jacks. Replace the seals of the jacks and tighten the hydraulic fittings. 4. Belts of different lengths. Dismantle the belts and check that they are of identical length. 5. Feed speed too high. Reduce the feed speed.
Why are the tines of the pick-up overtaking the forage on my Maschio EXTREME 266 Farm Equipment?
If the tines of the pick-up overtake the arriving forage, it indicates that the pick-up speed is too slow compared to the work speed. To resolve this, reduce the work speed or increase the rpm of the tractor PTO.
What causes the belts forming the bale to break on Maschio EXTREME 266?
If the belts forming the bale break and the clinches give way on your Maschio Farm Equipment, consider these possibilities: * Presence of foreign bodies in the forage. Check and if necessary replace or repair the belts. * The belts are not aligned correctly. Adjust the belt guiders and/or rollers of the tailgate. * The bale has exceeded the maximum diameter allowed. Check the adjustment end of strokes of the bale diameter. * The bale has exceeded the maximum diameter allowed. Check that the electrical system, cables of the machine, connection cables to the tractor, indicators and acoustic signal are working.
Why doesn't the bale diameter correspond to the set value on my Maschio Farm Equipment?
If the bale diameter does not correspond to the value set on your Maschio Farm Equipment, the potentiometer may have lost its synchronisation. Contact your dealer for re-phasing of the potentiometer.
What does "Battery insufficient" mean on my Maschio Farm Equipment display?
If a message appears on the display of your Maschio Farm Equipment saying "Battery insufficient," it indicates low voltage. Check the battery or the recharging system of the tractor.
What does "Bale binding not correct" mean on my Maschio EXTREME 266 display?
If a message appears on the display of your Maschio Farm Equipment saying "Bale binding not correct", it means the net has not been taken by the bale. Find and eliminate the cause, then restart the binding by pressing the "START-STOP" button.
Why is the clutch slipping on my Maschio Farm Equipment?
If you're experiencing clutch slipping on your Maschio Farm Equipment, it could be due to a bale that is too heavy or has too big a diameter; in this case, reduce the bale weight or diameter. Alternatively, the clutch disks may be worn out, requiring replacement.
Why does the forage wrap around the drive rollers on my Maschio EXTREME 266 Farm Equipment?
If the forage wraps around the drive rollers of your Maschio Farm Equipment, it could be due to high humidity in the forage. The forage must be conditioned, so bale when the humidity is quite low. It may also be that the scraper of the roller is not adjusted well or is worn, so adjust or replace the scraper.
Manual is integral part of machine, must be handed over.
Describes the intended use of the round baler for hay and straw.
Round baler with "CE" marking complies with EU directives.
Details provided on the identification plate of the machine.
Lists specific technical features of the baler models.
Provides detailed dimensional specifications for models 266 and 286.
Details empty and maximum allowed weights for model 266.
Specifies necessary tractor power and PTO requirements.
Describes the technical specifications of the ICON control system.
General warnings before operating the machine and for individuals.
Specific warnings related to machine operation and potential hazards.
Safety precautions and regulations for road transport.
Precautions to ensure safety during maintenance and repair work.
Explains the meaning and purpose of various safety pictograms.
Describes the function of protection guards for operator safety.
Details the mechanical parking device for securing the machine.
Details the safety systems for the cardan shaft (torque limiters).
Describes the shear bolt torque limiter for the pick-up transmission.
Safety instructions for loading the machine using a crane.
Procedures and safety for lifting the machine using a car jack.
Essential checks and preparations before starting machine operations.
Safety and procedures for connecting the baler to the tractor.
Procedures and safety for connecting the PTO shaft.
Safety and procedures for connecting to the tractor's hydraulic system.
Steps for connecting the hydraulic brake system to the tractor.
Steps for connecting the air brake system to the tractor.
Procedure for running in the brakes to ensure optimal efficiency.
Steps to disconnect the cardan shaft from the PTO shaft.
Steps to disconnect the brake system from the tractor.
Final steps for disconnecting the baler from the tractor.
Steps to switch on the machine and control system for operation.
Information on bale tying types and cycle initiation.
Procedure for safely unloading the finished bale.
Steps to safely clear product blockages in the machine.
Key functions and operations of the ICON system.
Detailed description of the baler's working screen interface.
Details on selecting and managing work programs.
Operating the baler in manual mode for specific tasks.
Common problems and solutions related to the power feed system.
Troubleshooting issues related to the cardan shaft.
Solutions for problems during bale start and formation.
Troubleshooting common issues with the twine and net binding process.
Recommended routine maintenance tasks for the machine.
Procedures and torque values for tightening bolts and screws.
Resetting and adjusting safety devices after activation.
How to adjust the tension of transmission and automatic stretcher chains.
Table of torque settings for various bolt sizes and classes.
Schedule for lubrication operations at the start and end of season.
Schedule of maintenance tasks to be performed seasonally.
Information on connectors and wiring for system connections.
General| Brand | Maschio |
|---|---|
| Model | EXTREME 266 Series |
| Category | Farm Equipment |
| Language | English |
To Next Page