Do you have a question about the Maschio ENTRY 150 and is the answer not in the manual?
Manual is integral part of machine; must be handed over with machine. Contact dealer if lost.
Round baler collects and presses forage into cylindrical bales; operator capable of all operations.
Details unladen weight, max weight allowed, and vertical load on towing eye/axle.
Specifies minimum tractor power, PTO speed, hydraulic/electric systems, and road speed for safe operation.
Details bale diameter, width, weight (hay, straw, grass), hourly production, chamber type, density, ejector, and bars.
Specifies features of the FF Control system: power supply, controls, indicators, microprocessor, memory, buzzer, protection, temp, humidity, vibration.
Explains symbols and signal words (ALERT, WARNING, CAUTION, IMPORTANT, Note) used in the manual for safety.
Pre-operation checks, forbidden uses, danger area radius, keeping distance from moving parts.
Focuses on individual safety: checking danger signs, not leaving machine unattended, no minors, safety radius, keeping clear of moving parts.
Covers hydraulic couplings, cardan shaft, PTO engagement, fire risk, wheel/tyre repairs, and road transport safety.
Precautions before adjustments/maintenance: stop machine, PTO disengaged, keys removed, safety devices intact.
Illustrates and describes specific safety pictograms with their codes and meanings.
Lists and illustrates protection guards for moving parts and foreign bodies, including safety locks.
Device to lock tailgate in open position during maintenance to prevent accidental closing.
Lists residual risks not fully eliminated by precautions: loss of equipment, vehicle control issues, death/injury.
Pre-operation checks: ensure machine is in order, lubricants at level, parts working, tractor/machine off.
Instructions for connecting the baler to the tractor for work, ensuring correct alignment and safety.
Procedure for connecting the FF Control system, including power cable, terminal installation, and signal cables.
Tests to perform after connections: checking functional movements, hydraulic system, electrical connection, lights, PTO engagement.
Loading and operating the single twine binder, including twine type, loading, threading, and binding process.
Loading and operating the double twine binder, including twine type, loading, threading, and connection of spools.
Loading and operating the net wrapper, including net type, loading, threading, and wrapping process.
Steps for starting operation: switching on FF Control, checking arms, opening pick-up valve, checking tailgate pressure.
Describes bale formation completion, tying activation, bale ejection, and use of bale extractors.
Procedure for clearing product blockages: stop tractor, switch off FF Control, remove pins, raise tailgate, block jacks.
Importance of regular maintenance for machine life and safety; torque settings, lubrication, and replacement of damaged parts.
Procedures for resetting/adjusting safety devices after activation.
Instructions for replacing the shear bolt on the pick-up safety device with an identical quality bolt.
Instructions for replacing shear bolts on the feed device transmission safety device.
Adjusting twine binder and net wrapper for proper bale tying and wrapping.
Adjusting twine binder distance from bale edge and twine tightness using handle 'M'.
Adjusting net wrapper for correct number of turns and contact pressure of draw rollers.
Procedure for replacing pick-up tines, including loosening screws, removing old tine, and fitting new one.
Adjusting pick-up cam position to control product release from tine to collection unit.
Safety warnings regarding welding: never weld with a bale inside, stop tractor, disconnect electrics.
Importance of regular lubrication with recommended greases and oils for all rotating parts.
Information on ordering spare parts from MASCHIO FIENAGIONE, specifying machine details.
Procedures for installing the control system components on the tractor.
Connecting the machine's data transmission and power cables to the tractor.
| Brand | Maschio |
|---|---|
| Model | ENTRY 150 |
| Category | Farm Equipment |
| Language | English |




