Maschio ENTRY 150 - 11_Tables and Diagrams; Types of Oil and Grease; Lubrication Operations

USE AND MAINTENANCE
ENGLISH
Cod. F07022163 pag.71
11_TABLES AND DIAGRAMS
11.1_TYPES OF OIL AND GREASE
USE TYPE
PTO deviation box AGIP BLASIA EP 150
Greasing points AGIP GR MU EP0
Tank for chain automatic oiling AGIP OSO 100
Manual lubrication of chains Mixture of oil and grease
11.2_LUBRICATION OPERATIONS
All the operations described below must be done at the beginning and end of each season.
When lubricating always respect the regulations contained in the chapter “9_Maintenance and adjustment”.
OPERATIONS TO BE DONE DAYS MONTHS
Grease all points provided for by decal B07500214.
10
Grease hinges of tailgate.
2
Grease pins of jacks.
2
Grease connecting rod of the feeder
2
Grease track of cams of pick-up unit.
1
Grease cardan shaft.
* 12
Replace oil of deviation box.
12
Manually lubricate transmission chains of pick-up unit.
1
Grease the slat conveyor chain.
12
(*) For further information on the maintenance of the cardan shaft consult the instructions contained in the
booklet provided together with the cardan shaft.