Maschio ENTRY 150 - Road Homologation

88 pages

Save Page as PDF

To Next Page

To Previous Page

USE AND MAINTENANCE

ENGLISH

Cod. F07022163

pag.5

Road homologation

If your round baler is approved for road traffic, the machine will be delivered complete with documents

necessary for matriculation.

You will then have to go to the office responsible for carrying out the matriculation.

Follow the instructions on the enclosed documents to register the machine.

Main Page

Table of Contents4
1_Introduction5
- Operator Manual5
- Guarantee5
- Use5
"Ce" Conformity6
- Identification6
- Road Homologation7
2_Certifications6
3_Technical Data8
- Dimensions8
- Weights9
- 1_Weights with Large Pick-Up9
- 2_Weights with Narrow Pick-Up9
- Pick-Up and Transport Unit10
- Net Binding10
- Tyres10
- Cardan Shafts11
- Tractor Requirements11
- Characteristics of the Bale11
Features of the Control System "Ff Control12
4_General Safety Regulations13
- Terminology Adopted13
- Safety Warnings14
- 1_Warnings to the Individual14
- 2_Warnings for the Machine16
- Maintenance in Safety17
- Adhesive Safety Signs18
- 1_Pictograms20
- 2_Reflectors23
- 3_Cardan Shaft Decal23
- Safety Devices24
- 1_Protection Guards24
- 2_Cardan Shaft Safety Device25
- 3_Pick-Up Transmission Safety Device25
- 4_Feed Device Transmission Safety Device25
- 5_Cardan Shaft Support25
- 6_Cardan Shaft Safety Chain25
- 7_Supports and Conduit Guides25
- 8_Parking Chocks26
- 9_Tailgate Safety Lock Device26
- Clothing26
- Sound Levels26
- Ecology and Pollution27
- Residual Risks27
5_Transport and Handling28
- Loading by Ramp29
- Loading by Crane29
- Lifting the Machine by Means of the Car Jack30
6_General Description31
- Main Components of the Round Baler31
- Description of the Work Process32
7_Instructions for Use33
- Before Use33
- Hook up to the Tractor for Towing34
- Hook up to the Tractor for Work35
1_"Standard" Hook36
2_"High" Hook36
- Connection of Various Devices of the Round Baler37
1_Connection of the Control System "Ff_Control37
- 2_Connection of the Lighting System37
- 3_Connection of the Hydraulic System38
- 4_Attachment of the Cardan Shaft38
- Operating Tests39
- Setting up the Machine for Work40
- 1_Loading and Operation of the Single Twine Binder40
- 2_Loading and Operation of the Double Twine Binder42
- 3_Loading and Operation of the Net Wrapper44
- 4_Adjusting the Pick-Up Wheels45
- 5_Rake45
- Field Preparation46
- 1_Conditioning46
- 2_Humidity Content46
- 3_Swathes46
8_Operation in the Field47
- Switching on47
- Feed Speed47
- Bale Tying and Unloading48
- Unblockage of the Product49
- Parking50
9_Maintenance and Adjustment51
- Routine Maintenance51
- Maintenance and Adjustment of Safety Devices52
- 1_Replacing the Pick-Up Safety Device52
- 2_Replacing the Feed Device Transmission Safety Device52
- Adjusting the Chain Tension53
- 1_Adjusting the Automatic Tensioners53
- 2_Adjusting the Manual Tensioners53
- Slat Conveyor Chain56
- Disengaging56
- Adjusting the Tying Devices57
- 1_Adjusting the Twine Binder57
- 2_Adjusting the Net Wrapper58
- Electrical and Electronic Components59
- Adjusting the Pick-Up Unit59
- 1_Adjusting the Working Height of the Pick-Up59
- 2_Hydraulic Raising of the Pick-Up59
- 3_Replacing the Pick-Up Tines60
- 4_Adjusting the Pick-Up Cam61
- Wheels and Tyres62
- Bolt Tightening62
- Welding62
- Lubrication62
- 1_Greasing63
- Hydraulic Oil63
- 1_Automatic Oiling of the Chains63
- 2_Tank64
- 3_Filter64
- 4_Manual Oiling of the Chains64
- 5_Deviation Box65
- Cleaning67
- After the First 30 Hours of Work67
- Daily Checks68
- Special Maintenance68
- Storage69
- 1_Storage of the Machine69
2_Storage of the "Ff Control" System69
- 3_Storage of the Cardan Shaft69
- 4_Storage of the Twine - Net69
- Before Resuming Work in the Field70
- Spare Parts70
10_Control System "Ff Control71
- Commands71
- 1_On-Off Key71
- 2_Twine Binder Button71
- 3_Net Wrapper Button71
- 4_Warning Light71
- Installation72
- Installation on the Tractor72
- 1_Feeder Cable72
- 2_Dovetail and Control Unit72
- Connecting the Machine to the Tractor72
- 1_Data Transmission Cable72
- 2_Power Cable72
11_Tables and Diagrams73
- Types of Oil and Grease73
- Lubrication Operations73
- Maintenance Work74
- Torque Settings (Thick Pitch)75
- Tyre Pressure Values75
- Driving Lights Electrical System76
- Mating Connectors77
- Hydraulic Diagram78
12_Problems and Causes79
- Power Feed79
- Start and Formation of the Bale80
- Twine Binding/Net Wrapping80
- Cardan Shaft80
- Hydraulic System81
13_Accessories and Kits (Optional)82
- Accessories82
- Kits82

Maschio ENTRY 150 - Road Homologation

Table of Contents

Related product manuals