Maschio ENTRY 150 - 9.4_SLAT CONVEYOR CHAIN; 9.5_DISENGAGING

ENGLISH
USE AND MAINTENANCE
pag.52 Cod. F07022163
Transport roller chain tension adjustment (right side)
 Loosen the 2 screws “V” and using a hammer,
adjust the tension of the chain by shifting the
tensioner downwards with light hammer strokes.
 Once the correct tension is obtained screw back
the 2 screws “V”.
Feeder chain tension (left side)
1) Loosen the screws and remove the guards located on the left side.
2) Loosen the 2 screws “V”.
3) Using a hammer, adjust the tension of the chain by shifting the tensioner downwards with light hammer
strokes.
1
2 3
 Once the correct tension is obtained screw back the 2 screws “V”.
 Refit the guards and screw them in place with the screws.
V
V