Why Mase Generators Inverter starts and stops?
Your Mase Generators Inverter might start and stop due to several reasons: * A defective fuel solenoid. * A choked fuel filter. * A defective injector pump. * Intervention of a safety device. * A defective feeding pump.
What to do if Mase Generators Inverter does not start?
If your Mase Generators Inverter does not start, the possible causes include: * Defective starting buttons. * Defective fuel solenoid. * Defective battery cable section. * Defective starting motor. * Choked fuel filter. * 12V circuit fuse issue. * Avv./Ev.relay problem. * Blocked valves.
Why Mase Generators IS 2500 Inverter produces black smoke?
The black smoke from your Mase Generators Inverter could be caused by a defective injector pump.
Why Mase Generators IS 2500 Inverter is running unstable?
Unstable running of your Mase Generators Inverter can be attributed to: * Too much oil in the crankcase. * A defective injector pump. * A defective governor linkage. * Worn valve guides. * Worn cylinder and position rings.
What to do if Mase Generators Inverter emits white smoke?
White smoke from your Mase Generators Inverter could be due to: * Safety device intervention. * Overload. * Defective injector.
Details how to find the generator's serial number.
Lists and labels all major components of the generator.
Explains the functions of control panel indicators and buttons.
Verifies resistance values for excitation, power, and battery charger windings.
Tests thermal switch, battery charger fuse, and relay board circuits.
Inspects rotor winding, diodes, and capacitor functionality.
Checks heat exchanger, solenoid valve, pumps, and belts.
Verifies temperature/pressure switches and engine speed adjustment.
Identifies probable reasons for failure to start the generator.
Addresses issues like unstable running, smoke, and overload.
General| Maximum Power | 2.5 kVA |
|---|---|
| Continuous power | 2.2 kVA |
| Voltage | 230 V |
| Frequency | 50 Hz |
| DC Voltage | 12 V |
To Next Page
