Why Mase Generators IS 4500 Inverter starts and stops?
Your Mase Generators Inverter might start and stop due to several reasons: * A defective fuel solenoid. * A choked fuel filter. * A defective injector pump. * Intervention of a safety device. * A defective feeding pump.
What to do if Mase Generators IS 4500 Inverter does not start?
If your Mase Generators Inverter does not start, the possible causes include: * Defective starting buttons. * Defective fuel solenoid. * Defective battery cable section. * Defective starting motor. * Choked fuel filter. * 12V circuit fuse issue. * Avv./Ev.relay problem. * Blocked valves.
Why Mase Generators Inverter produces black smoke?
The black smoke from your Mase Generators Inverter could be caused by a defective injector pump.
Why Mase Generators IS 4500 Inverter is running unstable?
Unstable running of your Mase Generators Inverter can be attributed to: * Too much oil in the crankcase. * A defective injector pump. * A defective governor linkage. * Worn valve guides. * Worn cylinder and position rings.
What to do if Mase Generators IS 4500 Inverter emits white smoke?
White smoke from your Mase Generators Inverter could be due to: * Safety device intervention. * Overload. * Defective injector.
Procedure to test the resistance of the excitation winding.
Procedure to test the resistance of the power winding.
Procedure to test the resistance of the battery charger winding.
Procedure to test the resistance of the rotor winding.
Procedure to test the forward and reverse resistance of rotor diodes.
Procedure to test the capacitor for short circuits or interruptions.
Procedure to test relay continuity and contact operation.
Procedure to test the generator's functions and identify causes of malfunction.
General| Brand | Mase Generators |
|---|---|
| Model | IS 4500 |
| Category | Inverter |
| Language | English |
To Next Page
