MASERATI GRANTURISMO MC TROFEO/GT4 SERVICE MANUAL
71
Ver 1.0 2/16
11.3.4.
Lower front subframe engine support plate.
The mechanical stress caused by the continuous vibration of the engine may cause some
cracking of the engine support housing on the lower front subframe.
To avoid the replacement of the entire subframe, install a specific plate on both sides, as
shown below.
The installation of the metal plate requires the replacement of the original fixing screw with a
new one M12x150 mm and a washer 35,8 x 2,5 mm.
The metal plate is not available as spare parts, but it can be produced by using the following
drawing.
The metal plate is reported on the 2016 GT4 homologation form.
To Next Page
Loading...
