Maserati Spyder - Page 104

4
104
Maserati Info Centre
Radio menu page (AUDIO)
PAGE ACTIVATION: press the AUDIO
key (18) briefly.
AUDIO SOURCE PAGE (FM1, FM2, FM3,
LW, MW, CD - if inserted, CD-Changer -
if installed): press the SRC key (15)
repeatedly.
SOUND PARAMETERS SETTING: “Audio
Setup” function.
Radio
WAVEBAND SELECTION: press the SRC
key (15) repeatedly.
MANUAL STATION SEARCH:
“Frequency” function. Turn the right-
hand knob (22) in a clockwise or
counter-clockwise direction to begin
the manual search of the higher or
lower frequency.
AUTOMATIC STATION SEARCH:
“Frequency” function. Press key (11) or
(12) to begin the automatic search of
the station, in a lower or higher
frequency, respectively.
AUTOMATIC STATION SAVING:
“Autostore” function.
MANUAL STATION SAVING: keep one
of the keys numbered from “1” to “6”.
STORED STATION SELECTION: briefly
press one of the keys numbered from
“1” to “6”.
TO RECEIVE TRAFFIC INFORMATION:
“TA/AF” function. Press the right-hand
knob repeatedly until the "TA " code
appears on the display.
AUTOMATIC SEARCH FOR THE
STRONGEST FREQUENCY FOR THE
STATION YOU ARE LISTENING TO: “TA/
AF” function. Press the right-hand
knob repeatedly until the "AF" code
appears on the display.
SEARCHING ALL NETWORKS: “LOC/
DX” function. Press the right-hand
knob (22) repeatedly until the “DX”
code appears on the display.
SEARCHING ALL NETWORKS WITH THE
STRONGEST SIGNALS: “LOC/DX”
function. Press the right-hand knob
(22) repeatedly until the "LOC" code
appears on the display.
SEARCHING STATIONS CLASSIFIED BY
TYPE OF PTY PROGRAM: “PTY”
function.
STEREOPHONIC RECEPTION: “St/
Mono” function. Press the right-hand
knob (22) repeatedly until the
“STEREO” code appears on the display.
MONOPHONIC RECEPTION (WEAK
NETWORKS): “St/Mono” function.
Press the right-hand knob (22)
repeatedly until the “MONO” code
appears on the display.
CD player
CD SOURCE SELECTION (if an audio CD
is inserted): press the SRC key (15)
repeatedly.
PREVIOUS TRACK SELECTION: press the
key (11) briefly.
NEXT TRACK SELECTION: press the key
(12) briefly.
CD PLAY/STOP: press the key (10)
briefly.
PAUSE: press the key (10) at length.
PLAY THE FIRST 10 SECONDS OF ALL
TRACKS: “Scan” function.
RANDOM TRACK SELECTION:
“Shuffle” function.
SELECTING THE INFORMATION
DISPLAYED: first select the "CD setup"
function and then the "Display"
function.
CONTINOUS PLAYING OF A SINGLE
TRACK: first select the "CD setup"
function, then the "Repeat" function,
followed by the "Single" option.
CONTINUOUS PLAYING OF THE ENTIRE
CD: first select the "CD setup "
function, then the "Repeat" function,
followed by the "Complete" option.
CD EJECTION: press the key (26).