Maserati Spyder - MSP system; Electronic setting of the suspensions (optional); SPORT setting

3
64
Controls and interior equipment
MSP system
The MSP system is automatically
activated when starting the engine.
It is possible to disconnect or reconnect
the system during running by pressing
button H. To prevent inadvertent
deactivation, the button is to be
pressed for about 2 seconds for
deactivating the MSP system.
When the MSP system is on, the button
led is off, when the system is on the
MSP warning light on the multi-
function display lights up.
When the system is off, the leds on the
pushbutton and the letters on
the multifunction display light up.
Electronic setting of the
suspensions (optional)
Press button L to set suspensions in the
"Sport" mode.
When the "Sport" setting is on, the
LED on the pushbutton and the word
SPORT on the multi-function display
light up.
SPORT setting
On the "Cambiocorsa" gearbox
version, which does not feature the
suspension electronic setting mode,
the pushbutton M (PWR) activates the
gearbox SPORT setting, which enables
the car to reach its maximum
performance for a sport-type driving
on demanding tracks.
When the POWER function is selected,
the LED on the pushbutton and the
letters PWR on the instrument panel
light up.
If the car is equipped with electronic
setting for the suspensions, the
POWER function is switched on
automatically when the suspension
sport setting is selected.
H
L M