4
Top
97
– Lift the rear part G of the top and
lower the top covering until the
hooks H are resting on their
respective locks.
– While keeping the rear part of the
top lifted, press pushbutton 1 to
attach the top covering locks.
WARNING Before proceeding with the
closing procedure, ensure that the two
top covering locks are properly
fastened. If not, try pressing
pushbutton 1 again and if necessary,
release the locks by pressing the
fastener with the wrench and pressing
pushbutton 1 again.
– Rest the rear part of the top on the
top covering.
– Open the front top hooks L by
turning the pin M with the wrench B.
– Press the front part of the top on the
windshield frame and re-lock the
hooks by turning pin M again using
wrench B.
– Press the hooks on the rear part of
the top and press pushbutton 2 to
secure the hook locks.
– Keep pushbutton 2 pressed until the
locks are properly fastened.
H G
M
B
L
To Next Page
Loading...
