To Next PageTo Next Page
Need help?Do you have a question about the Masibus UT-94 and is the answer not in the manual?
General| Brand | Masibus |
|---|---|
| Model | UT-94 |
| Category | Transmitter |
| Language | English |
Check that all cables are correctly connected according to the connection diagram for safety.
Details on how to specify the model number of the Universal Transmitter UT-94.
Specifies the conditions under which the unit should not be installed.
Describes how to mount the unit onto a DIN rail.
Details the physical space requirements for proper installation.
Instructions on how to detach the module from the DIN Rail.
Details settings for relay set points and hysteresis.
Covers input type, output type, and communication settings.
Provides procedures for ambient, input, and output calibration.
Information on the current software version of the instrument.
Procedure to calibrate ambient temperature sensing.
Calibrating the transmitter for various input types and ranges.
Procedure for calibrating the current or voltage output signals.
Details Modbus parameters accessible for reading and writing.
Lists Modbus parameters that can only be read.
Detailed specifications for all supported input types and ranges.
Information on the device's display and the functions of its keys.
Details on relay outputs and retransmission output capabilities.
Specifications for communication interfaces and protocols like RS485.
Information on standard and optional power supply requirements.
Covers size, mounting, operating temperature, and humidity.
Details advanced settings like digital filtering and password.
Diagram showing jumper settings for retransmission output configuration.
Step-by-step guide to diagnose and resolve instrument issues.
Guidance on connecting loads, including snubber circuits for protection.
