Specifications
410/420/430 - 001 8903 U1
UZEL
105
Drawbar
Standard:
Maximum static load:
Inner position 1000 kgf (2205 lbf).
Center position 775 kgf (1710 lbf).
Fully extended position 775 kgf (1710 lbf).
Distance to PTO shaft:
Inner position 250 mm (10 in).
center position 350 mm (14 in).
Fully extended position 400 mm (16 in).
Drawbar face to center of PTO shaft - Minimum 65 mm (2.5 in).
Drawbar face to center of PTO shaft - Maximum 265 mm (10.1 in).
Drawbar side swing from center 240 mm (9.5 in).
Capacities:
Engine sump oil - including filter:
All models 6,8 liter (1.80 US gal).
Transmission/hydraulic oil:
All models 35 liter (9.2 US gal).
Additional oil if creep gearbox fitted 2 liter (0.53 US gal).
Fuel tank 48 liter (12.7 US gal).
Cooling system 10,70 liter (2.83 US gal).
To Next Page
Loading...
