MASSEY FERGUSON 6455 - Page 98

Massey Ferguson 6400 - Issue 4.a
2A30.6
Splitting the front frame/Sisu engine - MF 6497-6499
Servicing above the engine
17. Take off:
- the sleeve (3) and the rigid air sleeve (5) of the air
cooler inlet (Fig. 7);
- the sleeve (4) and the rigid air sleeve (6) of the air
cooler outlet (Fig. 8);
18. Disconnect:
- the flexible particle suction sleeve between the
air filter and the exhaust;
- the lubricating pipes/hoses connecting the rear
axle right-hand hydraulic cover to the oil cooler.
19. Disconnect:
- the thermostatic fan ENG 19 connector;
- the upper hose (1) and the hose (2) linking the
expansion tank to the top of the radiator (Fig. 9).
Servicing at the front of the tractor
20. Take off:
- the front weights (if fitted);
- the centre weight (if fitted).
21. Detach the air conditioning compressor,
condenser and filter from their respective
supports. Carefully keep them apart without
opening the circuit (see chapter 12).
I
MPORTANT: If the air conditioning circuit should be
open, see chapter 12 before any action.
22. Mark and disconnect the wiring harnesses:
- inside the grille;
- on the control unit solenoid valves (suspended
front axle, if fitted).
5
3
MA-02-05115A
Fig. 7
6
4
MA-02-05116A
Fig. 8
2
1
MA-02-05117A
Fig. 9
¤
H