Massey Ferguson 6400 - Issue 4.a
2B11.5
Perkins/GTA2520 engine separation
Operations on the left-hand side of the
tractor
11. Remove the footplate.
12. Mark then disconnect:
- the hose on the steering ram
- the hoses (pressure-return and LS) on the rigid
pipes (Fig. 4) of the suspended front axle (if
fitted)
13. Mark and disconnect the fuel feed and return
hoses on the engine (block ports immediately).
N
OTE: If the fuel tank is not removed it obstructs
access to the engine screws on the spacer but does
not prevent access. However, if there is a problem,
remove the fuel tank having previously marked and
disconnected:
- the gauge harness
- the vent hose on the fuel tank
Fig. 3
Fig. 4
To Next Page
Loading...