Massey Ferguson 6400 - Issue 1
02C02.2
Splitting - GBA10 gearbox / Centre housing
A . General
There are two procedures for disassembling the
gearbox and the centre housing, depending on the
type of operation to be carried out on the tractor.
Disassembling with the cab fixed to the
centre housing
Accessible elements
• Gearbox output shaft
• Creeper unit and creeper gear selection mechanism
(if fitted)
• Power take-off clutch
• Handbrake mechanism
Disassembling with the cab fixed to the
gearbox
Accessible element
• Bevel gear
This section presents a general disassembly proce-
dure. Before and during disassembly, check that all
connections have been properly separated between
the fixed assembly and mobile assembly.
To Next Page
Loading...