Massey Ferguson 6400 - Issue 1
02B02.2
Splitting – Sisu Engine / GBA10 Gearbox
A . General
It is required to disassemble the tractor between the
engine and the gearbox when access is necessary to
carry out servicing on the following elements:
Engine interface
• Transmission damper
• Engine flywheel
• Engine adaptor plate
Gearbox interface
• Spacer, cover and sealing ring
• Internal hydraulic pipes
• Reverse shuttle and Dynashift
Remark
- This section presents a general disassembly proce-
dure. Before and during disassembly, check that all
connections have been properly separated between
the fixed assembly and mobile assembly.
- The cab remains attached to the centre housing.
To Next Page
Loading...