MASSEY FERGUSON 6499 - C. Disassembling and reassembling (Perkins 4-cylinder engine)

Massey Ferguson 6400 - Issue 2
02A01.9
Splitting - Front frame / Perkins engine
C . Disassembling and reassembling
(Perkins 4-cylinder engine)
Reminder
There are two types of front frame. Each model corre-
sponds to a specific engine type: Perkins engine with
mechanical injection or Perkins EEM engine with elec-
tronic injection.
The frames are different in shape and assembly.
Each front frame must be assembled to its corre-
sponding engine.
Preliminary operations
29. Apply the handbrake.
30. Remove the side panels, prefilter (Perkins EEM
engine), bonnet and side protection grilles.
Servicing under the tractor
31. Take off the guard, shaft and differential lock
supply pipe (4 WD tractors).
Servicing at the front of the tractor
32. Remove the front weights (if fitted).
33. Disconnect the batteries. Remove them if required
(Perkins engine with mechanical injection).
34. Detach the air conditioning compressor,
condensor and filter from their respective supports
(if fitted).
Place the assembly beside the tractor without
disconnecting the pipes and hoses (see
chapter 12).
Tractors with… Battery location
Perkins engine with
mechanical injection
in the grille
compartment
Perkins EEM engine behind the right-hand
footstep
Location of batteries
¤
H