Mastech HY1803D User Manual

- -
4
(6) Positive output terminal.
(7) Power ON/OFF switch
2.2 OPERATING PROCEDURE
2.2.1 For constant voltage mode adjust controls 3 clockwise to the
maximum position. Switch on the power ON/OFF switch 7 and adjust
controls 4 to set the desired output voltage. Connect the load to the output
terminals 5 & 6.
2.2.2 For constant current mode adjust controls 4 clockwise to the
maximum position. Adjust controls 3 anti-clockwise to the minimum
position. Switch on the power ON/OFF switch 7 and connect the load to
the output terminals 5 & 6. Adjust controls 3 to set the desired output

Mastech HY1803D Specifications

General

Brand	Mastech
Model	HY1803D
Category	Power Supply
Language	English