Need help?Do you have a question about the Mastech MY70 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Continuity Test | Yes |
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Data Hold | Yes |
| Auto Power Off | Yes |
| Frequency Range | 10Hz - 10MHz |
| Temperature Range | 1000°C |
| Battery | 9V |
General safety guidelines and warnings for using the multimeter.
Lists standard safety procedures to prevent electric shock and misuse.
Details safe practices to avoid errors, damage, and injury during operation.
Explains symbols used on the meter and in the manual for important safety information.
Outlines precautions for safe maintenance, including battery replacement.
Specifies input limits and protection for various measurement functions to prevent damage.
Identifies and labels the main components of the multimeter's front panel.
Details the symbols and indicators shown on the multimeter's LCD screen.
Describes the function and connection points of the multimeter's input sockets.
Explains basic operation modes like reading maintenance and battery saving.
Describes how to freeze the displayed reading and exit the mode.
Informs about the automatic power-off feature to conserve battery life.
Details how to measure AC and DC voltage safely and accurately.
Explains the procedure for measuring resistance, including precautions.
Guides on testing diodes outside a circuit, including polarity and voltage drop.
Explains how to perform continuity tests using the buzzer function.
Provides instructions for measuring capacitance with the meter.
Details the process for measuring transistor hFE approximation.
Explains how to measure the frequency of a circuit.
Guides on measuring temperature using a thermocouple.
Provides steps and warnings for measuring DC and AC current.
Lists general operating conditions, environmental specs, and fuse protection.
Details the accuracy specifications for various measurement functions.
Shows accuracy and input specs for DC voltage measurements.
Shows accuracy and input specs for AC voltage measurements.
Specifies accuracy and input/overload protection for frequency measurement.
Lists accuracy and overload protection for resistance measurements.
Details test environment and overload protection for diode testing.
Describes the test environment for audible continuity testing.
Details the test environment for transistor hFE measurement.
Shows measuring range, resolution, accuracy, and overload protection.
Lists measuring range, resolution, accuracy, and overload protection.
Details measurement ranges, accuracy, and overload protection for DC current.
Details measurement ranges, accuracy, and overload protection for AC current.
Provides basic cleaning instructions for the multimeter shell and sockets.
Guides on safely replacing the battery and fuses.
Advises on replacing damaged test leads with compliant ones.
Recommends cleaning methods using a soft cloth and avoiding liquid solvents.
Lists the included accessories with the multimeter.
To Next Page
