Master Forge 1010048 - Assemble the wheels; Assemble the front cart panel bottom; Assemble the front cart panel top

10
lowes.com/masterforge
®
4. Assemble the wheels
Slide the axle (Q) through one wheel (R)
and then through the right cart side and
then the second wheel (R). Secure in place
using the axle washer (EE) and a cotter
pin (FF). Shown in Fig. 4.
Hardware Used
Hardware Used
Hardware Used
5. Assemble the front cart panel
bottom
A. Attach the cart front panel bottom (P)
to the left cart side assembly and then to
the right cart side assembly using four
5/32-32 x 3/8 in. screws (AA). Shown in
Fig. 5.
6. Assemble the front cart panel
top
B. Attach the cart front panel top (O) to the
left cart side assembly and then to the right
cart side assembly using four 5/32-32 x 3/8
in. screws (AA). Shown in Fig. 6.
C. Attach the top and bottom cart panels
together using two 5/32-32 x 3/8 in. screws
(AA). Shown in Fig. 6.