13
lowes.com/masterforge
®
13. Attach the LP tank barrier bar
A.Slide the solid end of the LP tank barrier
bar (K) into the hole in the cart front panel.
Shown in Fig 13.
B.Attach the other end to the cart base (M)
using one 5/32-32 x 3/8 in. screw (AA).
Shown in Fig. 13.
Note: Make sure all cart screws are
securely tightened before proceeding to
the next steps.
Hardware Used
Hardware Used
14. Assemble the grill and cart
A. Have someone help you lift the grill
head (D) onto the cart assembly as shown
in Fig. 14A.
B. Secure the grill head (D) in place using
four 1/4-20 x 3/4 in. screws (CC) as
shown in Fig. 14B.
To Next Page
Loading...
