15 Lowes.com/masterforge
9. After the parts have been reconnected to the
grill, make sure the clearance between the
burner and electrode is maintained between
1/8 in. - 3/16 in. Otherwise, there will be no
spark during the ignition. The tip of the
electrode must be directly over a burner port.
10. Reconnect the regulator. Make sure the control valve is securely fastened to the burner.
11. Perform leak test.
TO STORE
Make sure the grill has completely cooled. Remove gas cylinder and replace plastic cap on
cylinder. Remove gas regulator from the grill to help keep dirt out of the gas cylinder probe. To
protect the gas regulator during storage and transport, the gas regulator has been designed to
be easily installed or removed from the grill. Store gas regulator in a heavy plastic bag and place
inside grill.
Make sure the gas regulator is
secured to the burner.
To Next Page
Loading...
Need help?
General
