DOLPHIN REMOTE
Programming Device Codes
65
DO NOT DIVE.
Programming Device Codes:
NOTE: Your remote has been preprogrammed at the factory
for all components. When the batteries are replaced,
these components may need to be reprogrammed.
1. Select Device (I) The LED will blink once to confirm.
2. Press and Hold the “Setup” button (J)
The LED will blink once, and then twice to continue.
3. Enter the four digit code on the Numeric keypad (E) –
the LED will blink twice after the last digit to confirm.
4. To lock in the code press the “POWER” (A) button.
Master Spas Device Codes
Kenwood Stereo / 0337
MB Quart DVD-CD-Stereo / 1318
Flat LCD TV / 1868
Master Spa Parts - 1068 American Drive, Neenah, WI, 54956, USA
To Next Page
Loading...
