5
NOTE: The model MP-MCA-30T has been tested and certified by the Water Quality
Association according to NSF/ANSI 44 for the specific performance claims as verified
and substantiated by test data as follows:
Rated Efficiency: 4186 Grains per pound of salt
4.5 lbs salt: 18.8 Kg Capacity
6 lbs salt: 20.0 Kg Capacity
15 lbs salt: 28.9 Kg Capacity
Rated Service Flow: 17.8 GPM @ 15 psi pressure drop
Resin: 1.0 Cubic Ft. Cation Exchange resin
NOTE: The model MP-MCA-45T has been tested and certified by the Water Quality
Association according to NSF/ANSI 44 for the specific performance claims as verified
and substantiated by test data as follows:
Rated Efficiency: 4186 Grains per pound of salt
6.75 lbs salt: 28.3 Kg Capacity
9 lbs salt: 30.0 Kg Capacity
22.5 lbs salt: 43.4 Kg Capacity
Rated Service Flow: 15.4 GPM @ 15 psi pressure drop
Resin: 1.5 Cubic Ft. Cation Exchange resin
NOTE: The model MP-MCA-60T has been tested and certified by the Water Quality
Association according to NSF/ANSI 44 for the specific performance claims as verified
and substantiated by test data as follows:
Rated Efficiency: 4186 Grains per pound of salt
9 lbs salt: 37.7 Kg Capacity
12 lbs salt: 40.0 Kg Capacity
30 lbs salt: 57.9 Kg Capacity
Rated Service Flow: 18.3 GPM @ 15 psi pressure drop
Resin: 2.0 Cubic Ft. Cation Exchange resin
Water Softener Positioning:
1. Place water softener in desired position, far enough from walls and
other obstructions to allow for servicing the unit.
2. Place the water softener within reasonable access to a grounded
115V/60 HZ circuit and a legal drain line connection.
To Next Page
Loading...
