12
EN
BODY FAT PROGRAM (P12)
Setting Data for Body Fat
Select “BODY FAT Program” using UP OR DOWN KEY, then press MODE/ENTER.
Sign“Male” will flash and gender can be adjusted by pressing UP OR DOWN KEY, press MODE/ENTER
to save gender & move to next data.
Value “175” for height will flash so height can be adjusted by pressing UP OR DOWN KEY. Press
MODE/ENTER KEY to save value & move to next data.
Value “75“ for weight will flash so weight can be adjusted bz pressing UP OR DOWN KEY, press
MODE/ENTER KEY to save value & move to next data.
Value “30” for age will flash so age can be adjusted using UP OR DOWN KEY, press MODE/ENTER to
save value.
Press START/STOP to start measurement, please also grasp hand pulse grips.
After 15 seconds the display will show out Body Fat %, BMR & BMI.
NOTE:
Body Types: There are 5 body types divided according to the FAT% calculated.
BMR: Basal Metabolism Ratio
BMI: Body Mass Index
Press START/STOP key to return the main screen.
Press MODE/ ENTER key to selection function display value on LCD.
MAINTENANCE
Cleaning
The upright bike can be cleaned with a soft cloth and mild detergent. Do not use abrasives or solvents
on plastic parts. Please wipe your perspiration off the upright bike after each use. Be careful not get
excessive moisture on the computer display panel as this might cause an electrical hazard or electronics
to fail.
Please keep the upright bike, specially, the computer console, out of direct sunlight to prevent screen
damage.
Please inspect all assembly bolts and pedals on the machine for proper tightness every week.
Storage
Store the upright bike in a clean and dry environment away from children.
TROUBLESHOOTING
PROBLEM SOLUTION
The upright bike wobbles when in use.
Turn the adjustable leveler on the rear stabilizer as
needed to level the upright bike.
There is no display on the computer console.
1. Remove the computer console and verify the
wires that come from the computer console are
To Next Page
Loading...
Need help?
General
