Need help?Do you have a question about the MASTERBLEND MASTERFORCE and is the answer not in the manual?
General| Brand | MASTERBLEND |
|---|---|
| Model | MASTERFORCE |
| Category | Scrubber |
| Language | English |
Connect the machine to grounded wall outlets and ensure proper circuit usage.
Explains the automatic chemical feed system and selecting metering tips for dilution ratios.
Procedure to prime the solution pump to restore pressure if fluctuations occur.
Details on the vacuum system, including motors, waste tank, and auto pump-out.
Instructions for cleaning the waste tank filter bag to catch debris and lint.
Explains the ball float shutoff system that protects vacuum motors from excess water.
Maintenance for the automatic pump-out system, including cleaning the screen and pump base.
Instructions for greasing the pump, specifying the correct amount and type of grease.
Instructions for inspecting, cleaning, and replacing wand jets for optimal performance.
Procedure to flush the solution system monthly to remove residues.
Steps to use WD-40 to clear moisture from vacuum motors and prevent damage.
Detailed steps to protect the MasterForce from freezing during storage using antifreeze.
Procedure for returning the MasterForce to service after storage, involving flushing with fresh water.
Diagram of the automatic chemical feed system with part references.
Lists specific kits available for the SHURflo 8030-863-299 pump model.
Covers removal of valve assembly, piston sleeve, crankshaft, and plunger cartridges.
Instructions for reassembling plunger cartridges, crankshaft, main bearings, and guide/seal components.
Procedures for cleaning pump body and heads, and installing fittings.
Steps for installing cylinder sleeves, piston stacks, plunger assemblies, and pump heads.
Fields to record serial number, date of purchase, and place of purchase.
To Next Page