MasterCool COMMANDER1000 User Manual

R134a RECOVERY/RECYCLE/RECHARGE
Operating Instructions
WARNING!!
Do not stop the recovery process. Permanent damage will occur that could void the warranty.
COMMANDER1000 (-E)
COMMANDER2000 (-E)
COMMANDER3000 (-E)

MasterCool COMMANDER1000 Specifications

General

Brand	MasterCool
Model	COMMANDER1000
Category	Test Equipment
Language	English

Summary

Introduction, Safety, and General Information

General Safety Guidelines

Hazard Precautions

Covers electrical, motion, fume, heat/freezing hazards and necessary precautions.

Explosion Hazards and Compliance

Warns against fire risks and lists safety standards and EPA certification.

Maintenance Procedures

Automatic Operation Procedures

Automatic vs. Manual Operation Modes

Explains the differences between automatic and manual modes for service.

Connecting and Opening Valves

Automatic Recovery Process

Describes the pre-programmed refrigerant recovery cycle and its display.

Vacuum/Leak Test Configuration

How to set vacuum time and perform leak testing in automatic mode.

Oil Injection Setup and Display

Options for oil injection and screen details, including refilling bottles.

Refrigerant Charge Configuration

How to set refrigerant charge using manual input or vehicle database.

Process Progression and Completion

Details on screen displays during vacuum, charging, and final process completion.

End of Charge / Hose Clearing

Manual Operation Procedures

Manual Operation Steps Overview

Manual Refrigerant Charge and Completion