EasyManuals Logo

MasterCraft 054-2500-0 User Manual

MasterCraft 054-2500-0
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
7
4V LITHIUM-ION COMPACT SCREWDRIVER - 054-2500-0
SAFETY GUIDELINES
• Underabusiveconditions,liquidmaybeejectedfromthebattery;avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, also seek medical help.
Liquid ejected from the battery may cause irritation or burns.
Service
• Haveyourpowertoolservicedbyaqualifiedrepairpersonusingonlyidentical
replacement parts. This will ensure that the safety of the power tool is maintained.
Safetyguidelinesforcordlessscrewdriver
• Holdpowertoolsbyinsulatedgrippingsurfaceswhenperforminganoperationwhere
thetoolmaycontacthiddenwiringoritsowncord.Contact with a “live” wire may make
exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Donotusedullordamagedbitsandaccessories.
• Onlyconnectthepowerunittoa120VACsupply.
• Beforescrewingintoawall,checkwithametal/voltagedetectortobesureyouarenot
drivingintoanelectricity,gas,orwatersupplyline.
• Avoidfrequentstallingwhenoperating,asthiscoulddamagethetool.
• Ifthetoolstalls,releasethetriggerimmediately,reversethedirectionofrotationand
slowlysqueezetriggertobackoutthebit.
• Donotexposethetoolandpowerunittorain;alsoprotectthemfrommoisture.
• Forbestresults,yourbatterytoolshouldbechargedinalocationwherethetem-
peratureismorethan0°C(32°F)butlessthat40°C(104°F).Do not store outside or in
vehicles.
• Donotchargethetoolinadamporwetlocation.Following this rule will reduce the risk of
electric shock.
• Donotoperatethepowerunitifithasreceivedasharpblow,beendropped,or
otherwisedamagedinanyway; take it to a qualified service person. Disconnect the power
unit from the power supply when not in use. Following this rule will reduce the risk of electric
shock, fire, or serious personal injury.
• Thispowerunitisintendedtobecorrectlyorientatedinaverticalorfloormountposi-
tion.
Safetyguidelinesforcharger
• Thetoolanditschargerarespecificallydesignedtoworktogether.Do not attempt to
charge the tool with any other type of charger. Do not attempt to charge any other type of
cordless tool with the tool charger.
• Onlyusethetoolwiththechargerlisted: SH-DC050300.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MasterCraft 054-2500-0 and is the answer not in the manual?

MasterCraft 054-2500-0 Specifications

General IconGeneral
BrandMasterCraft
Model054-2500-0
CategoryPower Screwdriver
LanguageEnglish

Related product manuals