ROUTER TABLE - 054-6938-6
21
Routing operation
1. Read and understand entire Instruction Manual for the router.
2. Adjust the fence in order to support the workpiece to be cut.
NOTE: The workpiece must always be held tightly against the fence.
3. Reconfirm that all router adjustments are securely locked before supplying power to the router.
4. Feed the workpiece from right to left.
WARNING!
The direction of feed for the workpiece is always against the sharp edges of the cutter, and
into the rotation of the cutter. Failure to follow this rule can result in serious personal injury.
OPERATING INSTRUCTIONS
To Next Page
Loading...
Need help?
General
