MasterCraft 054-6938-6 User Manual

ROUTER TABLE - 054-6938-6
23
PROBLEM POSSIBLE CAUSES SOLUTIONS
The router does not work The router is not plugged into
the table outlet
Plug the power cord from the
router into a table outlet
The power cord for the router
table is not connected to a
power source
Plug the power cord for the
router table into a power source
The switch on the router table
is in the “OFF” position.
Insert the key and pull the
switch to the ON position
The table surface is not flat The legs are not properly
assembled.
Check assembly directions, and
tighten all fasteners securely
The work surface is not flat Place the router table on a flat,
level surface
The router cannot be attached
to the table
The sub-base is too large Use a sub-base that does not
exceed 6-7/8" (17.5 cm) in
diameter
TROUBLESHOOTING

MasterCraft 054-6938-6 Specifications

General

Brand	MasterCraft
Model	054-6938-6
Category	Indoor Furnishing
Language	English